analyzing-disk-image-with-autopsy

# Analyzing Disk Image with Autopsy

## When to Use
- When you have a forensic disk image and need structured analysis of its contents
- During investigations requiring file recovery, keyword searching, and timeline analysis
- When non-technical stakeholders need visual reports from forensic evidence
- For examining file system metadata, deleted files, and embedded artifacts
- When building a comprehensive case from multiple disk images

## Prerequisites
- Autopsy 4.x installed (Windows) or Autopsy 4.x with The Sleuth Kit (Linux)
- Forensic disk image in raw (dd), E01 (EnCase), or AFF format
- Minimum 8GB RAM (16GB recommended for large images)
- Java Runtime Environment (JRE) 8+ for Autopsy
- Sufficient disk space for the Autopsy case database (2-3x image size)
- Hash databases (NSRL, known-bad hashes) for file identification

## Workflow

### Step 1: Install Autopsy and Configure Environment

```bash
# On Linux, install Sleuth Kit and Autopsy
sudo apt-get install autopsy sleuthkit

# Download Autopsy 4.x (GUI version) from official source
wget https://github.com/sleuthkit/autopsy/releases/download/autopsy-4.21.0/autopsy-4.21.0.zip
unzip autopsy-4.21.0.zip -d /opt/autopsy

# On Windows, run the MSI installer from sleuthkit.org
# Launch Autopsy
/opt/autopsy/bin/autopsy --nosplash

# For Sleuth Kit command-line analysis alongside Autopsy
sudo apt-get install sleuthkit
```

### Step 2: Create a New Case and Add the Disk Image

```
1. Launch Autopsy > "New Case"
2. Enter Case Name: "CASE-2024-001-Workstation"
3. Set Base Directory: /cases/case-2024-001/autopsy/
4. Enter Case Number, Examiner Name
5. Click "Add Data Source"
6. Select "Disk Image or VM File"
7. Browse to: /cases/case-2024-001/images/evidence.dd
8. Select Time Zone of the original system
9. Configure Ingest Modules (see Step 3)
```

```bash
# Alternatively, use Sleuth Kit CLI to verify the image first
img_stat /cases/case-2024-001/images/evidence.dd

# List partitions in the image
mmls /cases/case-2024-001/images/evidence.dd

# Output example:
# DOS Partition Table
# Offset Sector: 0
# Units are in 512-byte sectors
#      Slot    Start        End          Length       Description
#      00:  -----   0000000000   0000002047   0000002048   Primary Table (#0)
#      01:  00:00   0000002048   0001026047   0001024000   NTFS (0x07)
#      02:  00:01   0001026048   0976771071   0975745024   NTFS (0x07)

# List files in a partition (offset 2048 sectors)
fls -o 2048 /cases/case-2024-001/images/evidence.dd
```

### Step 3: Configure and Run Ingest Modules

```
Enable the following Autopsy Ingest Modules:
- Recent Activity: Extracts browser history, downloads, cookies, bookmarks
- Hash Lookup: Compares files against NSRL and known-bad hash sets
- File Type Identification: Identifies files by signature, not extension
- Keyword Search: Indexes content for full-text searching
- Email Parser: Extracts emails from PST, MBOX, EML files
- Extension Mismatch Detector: Finds files with wrong extensions
- Exif Parser: Extracts metadata from images (GPS, camera, timestamps)
- Encryption Detection: Identifies encrypted files and containers
- Interesting Files Identifier: Flags files matching custom rule sets
- Embedded File Extractor: Extracts files from ZIP, Office docs, PDFs
- Picture Analyzer: Categorizes images using PhotoDNA or hash matching
- Data Source Integrity: Verifies image hash during ingest
```

```bash
# Configure NSRL hash set for known-good filtering
# Download NSRL from https://www.nist.gov/itl/ssd/software-quality-group/national-software-reference-library-nsrl
wget https://s3.amazonaws.com/rds.nsrl.nist.gov/RDS/current/rds_modernm.zip
unzip rds_modernm.zip -d /opt/autopsy/hashsets/

# Import into Autopsy:
# Tools > Options > Hash Sets > Import > Select NSRLFile.txt
# Mark as "Known" (to filter out known-good files)
```

### Step 4: Analyze File System and Recover Deleted Files

```bash
# In Autopsy GUI: Navigate tree structure
# - Data Sources > evidence.dd > vol2 (NTFS)
# - Examine directory tree, note deleted files (marked with X)

# Using Sleuth Kit CLI for targeted recovery
# List deleted files
fls -rd -o 2048 /cases/case-2024-001/images/evidence.dd

# Recover a specific deleted file by inode
icat -o 2048 /cases/case-2024-001/images/evidence.dd 14523 > /cases/case-2024-001/recovered/deleted_document.docx

# Extract all files from a directory
tsk_recover -o 2048 -d /Users/suspect/Documents \
   /cases/case-2024-001/images/evidence.dd \
   /cases/case-2024-001/recovered/documents/

# Get detailed file metadata
istat -o 2048 /cases/case-2024-001/images/evidence.dd 14523
# Shows: creation, modification, access, MFT change timestamps, size, data runs
```

### Step 5: Perform Keyword Searches and Tag Evidence

```
In Autopsy:
1. Keyword Search panel > "Ad Hoc Keyword Search"
2. Search terms: credit card patterns, SSN regex, email addresses
3. Example regex for credit cards: \b(?:4[0-9]{12}(?:[0-9]{3})?|5[1-5][0-9]{14})\b
4. Example regex for SSN: \b\d{3}-\d{2}-\d{4}\b
5. Review results > Right-click items > "Add Tag"
6. Create tags: "Evidence-Critical", "Evidence-Supporting", "Requires-Review"
7. Add comments to tagged items documenting relevance
```

```bash
# Using Sleuth Kit for CLI keyword search
srch_strings -a -o 2048 /cases/case-2024-001/images/evidence.dd | \
   grep -iE '(password|secret|confidential)' > /cases/case-2024-001/keyword_hits.txt

# Search for specific file signatures
sigfind -o 2048 /cases/case-2024-001/images/evidence.dd 25504446
# 25504446 = %PDF header signature
```

### Step 6: Build Timeline and Generate Reports

```
In Autopsy:
1. Timeline viewer: Tools > Timeline
2. Select date range of interest (incident window)
3. Filter by event type: File Created, Modified, Accessed, Web Activity
4. Zoom into suspicious time periods
5. Export timeline events as CSV for external analysis

Generate Report:
1. Generate Report > HTML Report
2. Select tagged items and data sources to include
3. Configure report sections: